The RW Simon Ltd Framevent 5000HF (high flow) achieves 5,000mm2 EA on a length of only 420mm.

The Framevent 5000HF was developed to make it easy to achieve the requirements of Approved Document F 2006 whilst still maintaining the smooth, rounded, aesthetic line synonymous of the Framevent range.

Manufactured in the highest quality U.V. stabilised UPVc. Durable, easy to fit and fully tested.

5000 mm2 EA on a ventilator of only 420mm long, for easy compliance with Approved Document F 2006.

A robust smooth slim elegant rounded design.

Snap on quick fit end caps.

Positive open and close action.

Available in five colours:

  • Standard White
  • Bright White
  • Brown
  • Tan
  • Cream
  • Dual colours available on request

Can be fitted to deflect the incoming air upwards or downwards.

Suitable for PVCu, timber and aluminium windows.

Available with rod control.

Integral flyscreen in external hood.

Tested in accordance with BS EN 1026:2000 & BS EN 1027:2000 weather performance.

Tested in accordance with BS EN 13141-1:2004 for Equivalent Area.

Positive open and close action.

Achieves a water tightness limit of 400.

Rout out the frame with the correct slot size and configuration for the model to be fitted.

Place units centrally over the slots. Fix the unit in place using the screws provided.

If fixing the units to aluminium window frames, use the screw hole centre details shown opposite to drill pilot holes, then screw to frame as above.

Once the unit is screwed in place simply press the end caps in place on each end of the ventilator.